JETTE JONATHAN Bedienungsanleitung Seite 14

GB
Set-up:
Release the safety lock (fig. 1a) and pull the push bars all the way up (fig.
1b/1c) until you clearly hear them lock into place.
Wheel fastening:
Fastening the front wheels: press the wheels onto the wheel suspension on
the frame (fig. 2a).
Removing the front wheels: press both pins provided at the wheel suspen-
sion's bottom and pull off the wheel (fig. 2b).
Swivel wheel function:
Releasing the wheels: press the plastic clips downward (fig. 3a)
Locking the wheels: press the plastic clips upward (fig. 3b)
Assembling the rear axle:
Press the rear axle onto the frame, making sure the brake handle faces
backward (fig. 4a). If mounted correctly, you should be able to clearly hear it
clicking into place. To remove the rear axle, press both release buttons and
pull the axle off the frame (fig. 4b).
Brake:
Applying the brake: press the brake handle downward (fig. 5a).
Releasing the brake: press the brake handle upward (fig. 5b)
Important note: exclusively apply the brakes by using the respectively pro-
vided brake handles on the left or right side of the wheel.
Adjusting the footrest:
Press both levers on the right and left bottom side (fig. 6).
Safety belt:
To make use of the safety belt, close the buckle provided on the centre
piece. To unfasten the safety belt, press the central release button and pull
the buckle apart (fig. 7).