DeDietrich DOP450 Serie Bedienungsanleitung Seite 37

99633803_ML_A.qxd 06/06/05
H
6. ow do you program for energy-saving cooking?*
The analogue programmer should display only the time; it should not be flashing.
Turn the selector button to the
mode.
Enter the time by pressing the button.
• Place your dish in the oven based on the recommendation indicated in the display.
• Your oven recommends the optimal temperature for the chosen cooking mode:
200°C.
It is, however, possible to adjust the temperature by using the button located
under the display.
Example: "ECO Cooking" position adjusted to 190°C
After these three steps, the oven heats up:
The temperature rise indicator is activated and signals the incremental
temperature increase in the oven.
Three beeps will indicate to you that the set temperature has been reached.
To optimise the ECO cooking mode, do not pre-heat and do not open
the door during cooking.
*This position makes it possible to save up to 20% energy while still
offering identical cooking results.
The ECO position is used for the energy label performance.
After a cooking cycle, the circulating fan continues to function
for a period to ensure the heating elements are properly
cooled down.
10:07 Page 37
How does your oven work?
cooking
GB
37