Herunterladen Diese Seite drucken

HELIOSA HI DESIGN 998 Gebrauchsanweisung Seite 8

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

24. Do not cover or obstruct the front wire guard when in use.
25. Use a multi-polar switch with minimum contact gaps of 3 mm when installing the appliance.
26. Do not cover or obstruct the appliance whilst it is on.
27. Keep the front wire guard clean.
28. If you decide to permanently remove the appliance, switch it off and disconnect it from the mains, and then keep it well out of
the reach of children and the handicapped. It is also recommended to make it unusable by cutting its supply cable off.
29. Do not use the appliance in conjunction with programmers, timers or other tools capable of turning it on automatically.
30. Heaters must be switched on and switched off one by one. Do not use the main switchboard for switching on or switching off the
units, to avoid voltage surges which could burn out the bulb.
8

Werbung

loading

Diese Anleitung auch für:

999