System Recovery - Getac T800 Bedienungsanleitung

System Recovery

Windows 8 Models
If you're having problems with your Windows
8 computer, you can try one of the below
actions.

Restore your computer to an earlier point
in time.

Refresh your computer without affecting
your files.

Remove everything and reinstall Windows.
For more information, see the User Manual.
Windows 7 Models
A "System Recovery" tool allows you to
restore the Windows 7 system to the factory
state.
To run System Recovery:
1. Connect the AC adapter.
2. Turn on the Tablet PC. During system
startup when the logo screen appears, tap
and hold the screen or press the Windows
Logo button on your Tablet PC. This
invokes a menu. Select HDI Recovery in
the menu.
Or, if a keyboard is connected, you can
press Ctrl + Alt + F2 keys for four seconds
instead of tapping the screen.
3. In the screen that appears, select Recovery
to start the recovery process.
4. The progress bar shows the percentage
completed. When it reaches 100%, the
system turns off.
5. Turn on the computer. The Windows
setup wizard starts. Follow the onscreen
prompts to continue.
6. When the system restarts, the installer
screen appears. The installer will perform
system hardware detection and driver
installation.
7. When completed, the system restarts and
displays Windows desktop.
Taking Care of the Tablet PC
Location Guidelines

For optimal performance, use the Tablet
PC where the recommended temperature
is between 0 C (32 F) and 50 C (122 F).
(Aactual operating temperature depends
on product specifications.)

Avoid placing the Tablet PC in a location
subject to high humidity, extreme tempe-
ratures, mechanical vibration, direct sun-
light, or heavy dust. Using in extreme
environments for long periods can result
in product deterioration and a shortened
product life.

Operating in an environment with metallic
dust is not allowed.

Place the Tablet PC on a flat and steady
surface. Do not stand the Tablet PC on its
side or store it in an upside-down position.
A strong impact by dropping or hitting
may damage the Tablet PC.

Do not cover or block any ventilation
openings on the Tablet PC. For example,
do not place the Tablet PC on a bed, sofa,
rug, or other similar surface. Otherwise,
overheating may occur that results in
damage to the Tablet PC.

As the Tablet PC can become very hot
during operation, keep it away from
objects that are vulnerable to heat.

Keep the Tablet PC at least 13 cm (5 inches)
away from electrical appliances that can
generate a strong magnetic field such as a
TV, refrigerator, motor, or a large audio
speaker.

Avoid moving the Tablet PC abruptly from
a cold to a warm place. A temperature
difference of more than 10 C (18 F) may
cause condensation inside the unit, which
may damage the storage media.
General Guidelines

Do not expose your skin to the Tablet PC
when operating it in a very hot or cold
environment.

Do not place heavy objects on top of the
Tablet PC as this may damage the display.
3