Noise/Vibration Information; Technical Data; Angle Grinder - Bosch GWS Professional 22-180 H Originalbetriebsanleitung

6 Locking screw for protection guard
7 Mounting flange with O-ring
8 Grinding wheel*
9 Clamping nut
10 Two-pin spanner for clamping nut*
11 Quick-clamping nut
12 Carbide grinding head*
13 Protection guard for cutting*
14 Cutting disc*
15 Protection guard for for grinding cup*
16 Grinding cup*
17 Two-pin spanner, offset, for grinding cup*
18 Hand guard*
19 Spacer discs*
20 Rubber sanding plate*
21 Sanding sheet*
22 Round nut*
23 Cup brush*
24 Cutting guide with dust extraction protection guard *
25 Diamond cutting disc*
26 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Angle Grinder

Article number
Rated power input
Output power
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Thread length (max.) of grinder spindle
Restarting Protection
Reduced starting current
Weight according to EPTA-Procedure 01/2003
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
Protection class
Angle Grinder
Article number
Rated power input
Output power
Rated speed
Grinding disc diameter, max.
Thread of grinder spindle
Bosch Power Tools
*
GWS ...
3 601 ...
min

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 93 dB(A); Sound power level
104 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
Surface grinding: a =7.5 m/s
h
Disk sanding: a =4.5 m/s
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
GWS ... 22-180
3 601 ... H81 L..
W 2200
W 1500
-1
min 8500
mm 180
M 14
mm
kg 5.1
kg 5.0
24-180 24-230
JH
H83 M.. H84 L..
W 2400 2400
W 1600 1600
-1
8500 6500
mm 180 230
M 14 M 14
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s ,
2 2
, K=1.5 m/s .
22-180 22-230
H JH
H81 M.. H82 L..
2200 2200
1500 1500
8500 6500
180 230
M 14 M 14
25 25 25

–

–
5.1 5.3
5.0 5.2
/II /II /II
24-230 26-180
H JH JH
H84 M.. H55 M..
2400 2600
1600 1700
6500 8500
230 180
M 14 M 14
1 609 92A 0B8 | (5.8.13)
English | 19
22-230
H JH
H82 M..
2200
1500
6500
230
M 14
25

–

–
5.3
5.2
/II
26-230
JH
H56 M..
2600
1700
6500
230
M 14