Firmware Update - Noxon dRadio 110 Bedienungsanleitung

also set time and date information manually here.
Alarm Setup
The alarm setup offers two individuals alarm times.
For both alarm times you can set on/off state and the desired volume independently from
eachother.
FM Scan Setting
With this option you can decide if the automatic FM scan should only find strong stations
with a good reception quality, or if it should also stop on weaker stations as well.
Prune
If your DAB+/DAB station list contains stations marked with a question mark (meaning
that your dRadio 110 cannot receive these stations at the moment), you can permanently
remove them from the station list. If you want to add them to the station list again later
(for example after changing location in order to achieve a better quality of reception), you
have to execute a new station scan.
DRC
DRC means Dynamic Range Control. This function aims at smoothing the differences
in volume between different stations, which can result in an overall more homogeneous
listening experience.
SW Version
This shows the software version running on your device.
Factory Reset
Should you decide to reset your dRadio 110 to its default settings, you can do this here.
Attention: This will delete all of your settings and saved stations!

Firmware Update

An essential part of our corporate philosophy is the constant improvement of our devices.
For this reason we have provided the dRadio with an USB port. This USB port is solely
responsible for the firmware/software update, therefore it is not capable of transferring
any other data.
Preparation
Please visit the following website:
http://www.terratec.net/en/drivers-and-support.html
and choose the dRadio 110 as your product.
Download the latest firmware and unpack it into the main directory of your USB stick
(not into a subfolder). It is also important that the USB stick is formatted in FAT32 format.
Other formats are not supported by the dRadio 110.
21