Control Panel - IKEA HDN G600 Betriebshandbuch

PRODUCT SHEET
5
4

1. Control panel.

2. Grease filter
3. Light
4. Steam deflector
5. Telescopic flue
Lamp maintenance
1. Disconnect the hood from the power supply.
2. Replace the burnt-out lamp. (Fig.1)
3. Only use halogen lamps 20W max. GU4 - 12 V - Ø 35mm
- 30° - Dichroic, taking care not to touch them with hands.
Grease filters:
The metal grease filter has an unlimited life and must be
washed once a month by hand or in a dishwasher at low
temperature and with a short cycle. With cleaning in a
dishwasher the grease filter may become dull; this does not
affect its filtering capacity.
Grease filter maintenance:
1. Disconnect the hood from the power supply.
2. Remove the grease filter/s Fig. 2. to remove it/them,
pull the spring release handle back (f1) then remove the
filter/s downwards (f2)
Carbon filter maintenance
installation models only):
The carbon filter must be cleaned once a month in a
dishwasher at the highest temperature, using a normal
dishwasher detergent. It is advisable to wash the filter
separately.
After washing, reactivate the carbon filter by drying it in the
oven at 100°C for 10 minutes.
Change the carbon filter every 3 years
Fitting the carbon filter:
1. Remove the grease filter (f1/f2 - Fig. 2).
2. Remove the filter holder frame, turning the knobs 90°
(g - Fig. 3).
3. Fit the carbon filter (i - Fig. 3) in the filter holder frame
(h - Fig. 3).
Proceed in reverse order to refit the filter holder frame and
grease filter.
5019 618 33094/A
D GB F NL
1
2
3
3
(for filter hood
E P I GR
CONTROL PANEL
Light switch.
Press the button to switch on the lights.
Extraction power selection key.
Press the button to select the power/speed.
Keep the button pressed for 2 seconds to switch OFF.
N
S DK
FIN
PL
Fig.1
f1
f2
Fig.2
Fig. 2
Fig.3
RUS BG RO
CZ SK H
LI21WA