Renlig FWM7 Gebrauchsanleitung Seite 21

ENGLISH
First try to find a solution to the problem
(refer to the table). If not, contact the
Authorised Service Centre.
With some problems, the acoustic signals
operate. The red indicator
one of the indicators comes on, to show an
alarm code:
• - The appliance does not fill with
water properly.
• - The appliance does not drain the
water.
Possible failures
Problem
The programme does not
start.
The appliance does not
fill with water properly.
flashes and
• Make sure that the mains plug is connected to the mains
socket.
• Make sure that the appliance door is closed.
• Make sure that there is not a damaged fuse in the fuse box.
• Make sure that the Start/Pause has been pressed.
• If the delay start is set, cancel the setting or wait for the end
of countdown.
• Deactivate the Child Lock function if it is on (if available).
• Make sure that the water tap is open.
• Make sure that the pressure of the water supply is not too
low. For this information, contact your local water authority.
• Make sure that the water tap is not clogged.
• Make sure that the filter of the inlet hose and the filter of the
valve are not clogged. Refer to "Care and cleaning".
• Make sure that the inlet hose has no kinks or bends.
• Make sure that the connection of the water inlet hose is cor-
rect.
• Make sure that the drain hose is in the correct position. The
hose may be too low.
• - The appliance door is open or not
closed correctly. Please check the door!
• The indicator of button
11 times and 1 (or 2 or 3) time(s) in
green: the mains supply is unstable. Wait
until the mains supply is stable and the
appliance automatically starts operating.
Warning! Deactivate the
appliance before you do the
checks.
Possible solution
21
flashes in red