Renlig FWM7 Gebrauchsanleitung Seite 15

ENGLISH
Programme
Temperature range
DRAIN
SPIN
EASY IRON
60° - 40° - 30° -
(Cold)
REFRESH 20 MIN
30°C
JEANS
60° - 40° - 30° -
(Cold)
MINIPROGRAMME
30°C
ON/OFF
1) Standard programmes for the Energy Label consumption values. According to regulation 1061/2010, these pro-
grammes are respectively the «Standard 60°C cotton programme» and the «Standard 40°C cotton programme». They
are the most efficient programmes in terms of combined energy and water consumption for washing normally soiled
cotton laundry.
The water temperature of the washing phase may differ from the temperature declared for the selected
programme.
2) During this cycle the drum rotates slowly to ensure a gentle washing. It can seem that the drum doesn't rotate or
doesn't rotate properly. Consider this as a normal functioning of the appliance.
3) The appliance performs the short heating phase if the water temperature is below 20°C. The appliance can show
the temperature setting as "cold".
4) The default spin speed is 700 rpm.
5) To reduce the creases of the laundry, this cycle regulates the water temperature and performs a soft wash and spin
phase. The appliance adds some rinses.
Maximum load
Maximum spin
speed
7 kg To drain the water in the drum. All fabrics.
7 kg To spin the laundry and to drain the water in the
1200 rpm drum. All fabrics.
1 kg Synthetic items to be gentle washed. Normal and
900 rpm
light soil.
1 kg Synthetic and delicate items. Light soil items or
900 rpm items to refresh.
3 kg Items in denim and jersey. Normal soil.
1200 rpm
3 kg A short cycle for synthetics and delicate items with
700 rpm light soil level or for items to freshen up.
Position to turn the appliance off or/and reset a programme.
Programme description
(Type of load and soil level)
5)
15