AEG LB 4715 BT Bedienungsanleitung Seite 33

NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. The sound
however is not played back via the speaker. After you
have ended the call, the devices are connected to
each other again and playback continues. The volume
increases slowly.
USB port (5)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Press the MODE button (3/1) repeatedly until "USb" is
shown on the display.
2. Connect a USB storage device directly into the port. After
a few seconds, the total number of titles appears briefly.
Playback then begins. " ", MP3, "
folder, and the elapsed playing time of the current title
are shown on the display.
For operation, please refer to the section "Description of the
USB controls".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
CAUTION:
Before removing the USB storage device, switch the device
to another mode using the MODE button (3/1).
Description of the USB controls
(10/2)
You can pause and continue music playback. Press again to
continue playback.
(4/4)
Press 1 x =
Press 2 x =
Press 3 x =
NOTE:
The number of the current title is displayed briefly.
(4/4)
Press to skip to the next song and the following songs.
NOTE:
The number of the current title is displayed briefly.
RPT (7 on the FB)
Activates the Repeat function.
• All titles are constantly repeated by default.
The "
• Press the button to repeat only the current title.
The "
ST/MO / RAN (5 on the FB)
Activates random playback. All titles are played back in a
random sequence. To deactivate the function again, press
the RPT button 2x.
NOTE:
The activated function cannot be displayed for technical
reasons.
", the current
In radio mode:
Stereo/Mono switching. In case of bad reception, press this
button to switch to mono. The message "ST OFF" appears
for a short time on the display. Press the button again to
return to stereo. The message "ST ON" appears for a short
time on the display.
/ (4 on the FB)
If folders exist, the next or previous folder is selected. Play-
back is stopped and the "
folder (e.g. 04) and the number of the title with which play-
back begins are displayed (e.g. 0016).
OK (8 on the FB)
Playback starts in the previously selected folder.
English
Restart of the song from the beginning.
Skip to the previous song.
Skip to the song before the previous song.
" symbol is displayed.
" symbol flashes.
" symbol appears. The selected
33