Herunterladen Inhalt Inhalt Diese Seite drucken

Before Starting - AEG Electrolux Ergospace Bedienungsanleitung

Hygiene filtertm e12, waschbar
Inhaltsverzeichnis

Werbung

English

Before starting

Open the front cover on the machine and check that the
dust bag, s-bag
®
and the motorfilter are in place. (See also
Replacement of filter(s))
10
Open the back lid on the machine and check that the
exhaust filter is in place.
11
Insert the hose until the catches click to engage (press
the catches to release the hose). (2). Insert the hose into
the hose handle until the catches click to engage (press
the catches to release the hose).
12
Attach the extension tube* or telescopic tube* to
the hose handle and nozzle by pushing and twisting
together. (Twist and pull apart to dismantle.)
13
Extend the electric cable and connect it to the mains. The
vacuum cleaner is fitted with a cable winder. Once the
electric cable has been extended, it stays in that position.
14
To rewind the cable, press the cord rewinder button. The
cable will then rewind.
15
ON/OFF control: Push the ON-OFF button once to start
the vacuum cleaner. Push same button once more to turn
it off.
16
Power Regulation: Twist the power control towards „max"
to increase the suction power. Twist the power control
towards „min" to decrease suction power. Additional
suction power control: Use the suction control on the
hose handle.
17
Practical parking positions (and at the same time a
backsaving feature) when you pause during cleaning or
when you carry and store the vacuum cleaner.
18
You can also carry the vacuum cleaner using the handle
on top or on the lower front edge of the machine.
19
Keep the hose in place while storing the vacuum cleaner
by extending the elastic bumper cord and placing it
across the hose.
* Certain models only.
Deutsch
Vorbereitungen
Frontabdeckung des Geräts öffnen und kontrollieren, dass
Staubbeutel s-bag
®
und Motorfilter eingesetzt sind. (Siehe
auch „Filterwechsel".)
10
Hintere Abdeckung des Geräts öffnen und kontrollieren,
dass Abluftfilter eingesetzt ist.
11
Schlauch einführen, bis Verriegelung einrastet (zur
Freigabe des Schlauches auf die Verriegelung drücken).
(2). Schlauch in den Schlauchgriff einführen, bis
Verriegelung einrastet. Zur Freigabe des Schlauches
Verriegelung drücken.
12
Das Verlängerungsrohr* oder das Teleskoprohr* durch
gleichzeitiges Drehen und Drücken am Schlauchgriff und
an der Bodendüse anbringen. (Zum Zerlegen drehen und
auseinander ziehen.)
13
Elektrokabel herausziehen und an Steckdose anschließen.
Der Staubsauger verfügt über eine automatische
Kabelaufwicklung. Nach dem Herausziehen des Kabels
arretiert die Kabelaufwicklung.
14
Zum Aufwickeln des Kabels die Aufrolltaste drücken. Das
Kabel wird wieder aufgewickelt.
15
EIN/AUS-Schalter: Zum Einschalten des Staubsaugers den
EIN/AUS-Schalter einmal drücken. Erneutes Drücken des
Schalters schaltet das Gerät aus.
16
Leistungsregulierung: Zum Steigern der Saugleistung
Leistungsregler in Richtung „max" drehen. Zum
Reduzieren der Saugleistung Leistungsregler in Richtung
„min" drehen. Zusätzliche Regelung der Saugleistung:
Saugsteuerung am Schlauchgriff einstellen.
17
Praktische und zugleich rückenschonende Parkpositionen
für Arbeitspausen, den Transport und die Aufbewahrung
des Staubsaugers.
18
Staubsauger kann auch am Griff (oben oder an der
unteren Vorderkante) getragen werden.
19
Schlauch für die Aufbewahrung des Staubsaugers
fixieren. Dazu elastischen Gummizug herausziehen und
um den Schlauch legen.
* Nur bestimmte Modelle.
6
10
11
12
14
13
16
15
18
17
19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis