Before You Start; Check Voltage; Proprietary Carpet Conditioning And Air Freshening Materials; Thermal Cut-Off - AEG Electrolux 60 Serie Gebrauchsanweisung

60-70 elux_1.qxp 23.08.2005 10:47 Uhr Seite 12

BEFORE YOU START

Check the voltage
First check the voltage shown on the data plate (see rear view) to make sure that the cleaner is of the correct voltage for your
electricity supply. If it is not, do not use the cleaner but refer back to your dealer.
WARNING
The brush in the cleaning head rotates at high speed and can cause damage to the mains supply cable if the cleaner
passes over it during cleaning operations.
Care should be taken to ensure that this does not happen. If the cleaning head has accidentally passed over the mains supply
cable the following action should be taken:
1. Switch off and remove the plug from the socket outlet.
2. Examine the mains supply cable for damage (only after removing the plug from the socket outlet).
3. If there is any sign of damage to the supply cable it MUST be renewed. The repair MUST be carried out by an AEG-Electrolux
Service Agent or a similar qualified person.
4. NEVER use the machine with a damaged mains supply cable.

Proprietary carpet conditioning and air freshening materials

After using proprietary carpet conditioning powders, it is recommended that the dustbag or filters be changed. Some of these
preparations contain substances which if left in the vacuum cleaner for extended periods could damage the plastic mouldings
which form the structure of the cleaner.
Many air fresheners, household deodorants, sprays and polishes contain a highly flammable gas propellant.
Because of this, it is particularly important that these products are used strictly in accordance with the relevant manufacturer's
instructions.
It is essential that none of the above products are sprayed directly into the vacuum cleaner or any of its filters, hose assembly,
dustbag chamber or dust cup.
Thermal Cut Off
This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly shuts
off, push the on/off switch off (0) and unplug the cleaner. Check the cleaner for a possible source of overheating such as a full
dustbag, a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting
to use the cleaner. After the 30 minute period, plug the cleaner back in and push the on/off switch on (l). If the cleaner still does
not run, please contact your next AEG-Electrolux dealer.
12