Removal Of Glass Shelf Blockers From The Product; Door Reversal - Electrolux ERA 36502 W Benutzerinformation

Removal of glass shelf blockers
from the product
The glass shelf blockers are used to fix
the shelves into position during product
transport. These blockers will not be
necessary for the further operation of the
product.
Open the refrigerator door as wide as
possible.
1 Slide the blocker tabs to the front of the
shelf.
2 Lift the back of the shelf from its nest
and then pull it towards yourself by tilting
its front upwards/downwards.
3 Remove the blocker tabs.

Door reversal

Should the location demand it, the
opening direction of the door can be
changed.
The appliances are delivered with the
door opening to the right.
Carry out the steps as per the pictures
and the instructions.
We recommend that you have another
person to help you who can safely
hold the doors of the appliance
secure.
Disconnect the appliance from the
electrical supply.
Fig. 1
Open the door of the fridge, dismantle
the top cover (j) by removing the 2
screws (a), then close the door
(Fig. 2).
Move the panel (g) from one side of
the top cover (2) to the other (Fig. 2).
Fig.2
Unscrew the 2 screws (c), remove the
door mount at the top right-hand side
(d), and unscrew the screw on the
other side (c), remove the panel (b)
and place in an empty plastic bag.
Lift the fridge door up slightly and
remove.
Unscrew the screw (m), remove the
door stopper (h) and attach reversed
on the other side (Fig. 2).
electrolux 55
GB