Auxiliary Function Selection; Time Display - Beko WMY 71443LMB2 Bedienungsanleitung

4.7 Auxiliary function selection

Select the desired auxiliary functions before starting the
programme. Whenever a programme is selected, frames of
the auxiliary function symbol that can be selected together
with it illuminates. And when you select an auxiliary function,
the interior area of the auxiliary function symbol also starts
to illuminate.
C
Frame of the auxiliary function symbol that cannot
be selected with the current programme does not
illuminate.
Also the frames of the auxiliary function suitable for the
current programme after the washing has started remains
illuminated. You can select or cancel the auxiliary functions
whose frames are illuminated. If the wash cycle has reached
a point where you cannot select the auxiliary function, the
function's frame turns off.
C
Some functions cannot be selected together. If a second
auxiliary function conflicting with the first one is selected
before starting the machine, the function selected
first will be canceled and the second auxiliary function
selection will remain active. For example, if you want to
select Quick Wash after you have selected the Additional
Water, Additional Water will be canceled and Quick Wash
will remain active.
An auxiliary function that is not compatible with the
programme cannot be selected. (See, "Programme and
consumption table")
Some programmes have auxiliary functions that must
be operated simultaneously. Those functions cannot be
cancelled. The frame of the auxiliary function will not be
illuminated, only inner area will be illuminated.
• Voorwas (Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not
using the Prewash will save energy, water, detergent and
time.
• Express Wassen (Quick Wash)
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with
half of the maximum laundry specified in the programme
table.
• Extra Spoelen (Rinse Plus)
This function enables the machine to make another rinsing
in addition to the one already made after the main wash.
Thus, the risk for sensitive skins (babies, allergic skins, etc.)
to be effected by the minimal detergent remnants on the
laundry can be reduced.
36 / EN
88
C
0
88:88
1888
• Anti-Creasing
This function creases the clothes lesser when they are being
washed. Drum movement is reduced and spin speed is
limited to prevent creasing. In addition, washing is done with
a higher water level.
• Rinse Hold
If you are not going to unload your clothes immediately after
the programme completes, you can use rinse hold function
to keep your laundry in the final rinsing water in order to
prevent them from getting wrinkled when there is no water
in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry.
Programme will resume and complete after draining the
water.
If you want to spin the laundry held in water, adjust the Spin
Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun
and the programme is completed.
• Nacht Modus (Night mode)
Use to wash the cottons with lesser energy consumption and
silently. Spin steps are cancelled for a silent washing and the
cycle ends with the Rinse Hold step. After completion of the
programme, run Spin cycle to spin the laundry.

Time display

Remaining time for the completion of the programme while
it is running is displayed as "01:30" in hours and minutes
format.
C
Programme time may differ from the values in the
"Programme and consumption table" depending on
the water pressure, water hardness and temperature,
ambient temperature, amount and the type of laundry,
auxiliary functions selected and the changes at the
mains voltage.
4.8 End Time
With the End Time function, the startup of the programme
may be delayed up to 24 hours. After pressing End
Time button, the programme's estimated ending time is
displayed. If the End Time is adjusted, End Time indicator
is illuminated.
In order for the End Time function is activated and the
programme is completed at the end of the specified time,
you must press Start / Pause button after adjusting the
time.
88
C
0
88:88
1888
88
C
0
88:88
1888
Washing Machine / User's Manual