Weidmuller DPA Bedienungsanleitung Seite 19

Input connection diagrams for thermocouple inputs.
•Installation
Caution: In order to meet product safety requirements, these units must
only be installed, by qualified staff, in accordance with the information
given in this manual, using the mounting clips and terminal blocks
supplied, and all relevant national electrical wiring and safety rules
must be followed.
Locate the instrument in an area that is free from dust, moisture and
corrosive gases (pollution degree II or better).
PowerSupplyRequirements
Check the power supply against the model number before applying
power to the instrument.
DPA/TCX
2 3
T/C extension wire
– +
Ground cable shield at
T/C end only
1