Herunterladen Inhalt Inhalt Diese Seite drucken

Tastaturschnittstelle - Grundeinstellung - Datalogic CATCHER D531 Kurzanleitung

Präsentationsscanner
Inhaltsverzeichnis

Werbung

TASTATURSCHNITTSTELLE - GRUNDEINSTELLUNG

amerikanische Tastaturnationalität, Caps-lock aus, caps lock auto-recognition
ein, Num-lock unverändert, keine Verzögerungszeit zwischen Charakter, keine
Verzögerungszeit zwischen Coden, Kontrollezeichen = Ctrl+Shift+Taste.
: code identifier disabled, no field adjustment, code length not
DATEN FORMAT
transmitted, no header, terminator = ENTER, character replacement disabled.
POWER SAVE
stand by state enabled, enter stand by timeout 5 min., sleep state enabled,
sleep state timeout 60 min.
READING PARAMETERS
Timeout between same code consecutive readings 0,3 sek., beeper intensity
high, tone 2, beeper type monotone, beeper length short, single line decoding
duration = 5 sec., single line timeout OFF before raster = 2 sek.
DECODING PARAMETERS
ink spread disabled, overflow control enabled, interdigit control enabled,
decoding safety = one read, code 39 stitching enabled, code 128 stitching
enabled.
CODE SELECTION
Enabled codes
EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions, autodiscriminate decoding safety
= 15 reads
Interleaved 2/5
check digit control and transmission, variable length code, 6-99
characters
Standard Code 39
no check digit control, variable length code, 4-99 characters
Code 128
variable length code, 1-99 characters
Disabled codes
EAN 128, ISBT128, Code 93, Codabar, MSI, Plessey, RSS
ADVANCED FORMATTING PARAMETERS
concatenation disabled, no advanced formats defined.
16
DATALOGIC

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis