Samsung SR8850 Benutzerhandbuch Seite 19

Assembling the cleaner
NAME OF EACH PART
[ Status Display Window ]
DISPLAY PART
1. Number Display
- Shows the timer display, progress status, and error codes using numbers, letters and graphics.
2. Battery Level Indicator
- Charging : Shows the charging progress in 3 steps.
- In Use : Shows the battery charge level. The battery charge level is reduced by each level from FULL
while operating. (When the battery is fully discharged, one level will fl ash to display "LO".)
3. Scheduled Cleaning
- When cleaning is scheduled, the Scheduled Cleaning icon is lit.
4. Daily
- When daily cleaning is scheduled, the Daily icon is lit.
5. Recharging
- This icon turns on when the cleaning robot returns to the charger station to charge its battery.
6. Cleaning Mode Display
- Each time the Cleaning Mode button is pressed, the corresponding cleaning mode is displayed.
(a) Auto Mode : This icon turns on when Auto cleaning mode is selected.
(b) Spot Mode : This icon turns on when Spot cleaning mode is selected.
(c) Max Mode : This icon turns on when Max cleaning mode is selected.
(d) Manual Mode : This icon turns on when Manual cleaning mode is selected.
(e) Edge Mode : "
BUTTON PART
7. Start/Stop
- Press to start/stop cleaning.
8. Cleaning Mode
- Press to select a cleaning mode. After selecting a cleaning mode, press the (
9. Timer/Daily
- Press to set a scheduled or daily cleaning.
10. Recharging
- When this button is pressed, the Recharging icon is turned on and the cleaning robot will return to the
charger station to charge its battery.
1
6
Ⓐ Ⓑ Ⓒ
8 9
" is on when Edge cleaning mode is selected.
7
4
3
2
5
Ⓓ
10
) button to start cleaning.
Assembling the cleaner _19