Introduction; Features; Safety Instructions - Omnitronic DB-100 Bedienungsanleitung

Decibel Level Meter
For your own safety, please read this user manual carefully
Every person involved with the installation, operation and maintenance of this device has to
- be qualilfied
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet

1. INTRODUCTION

Thank you for having chosen an OMNITRONIC DB-100/DB-100 B. If you follow the instructions given in this
manual, we can assure you that you will enjoy this device for many years.
Unpack your OMNITRONIC DB-100/DB-100 B.
Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C
connection cable or on the casing, do not take the device into operation and immediately consult your local
dealer.

1.1 Features

Professional Decibel Level Meter
For displaying the signal level on an external display • Display ranging from -57 dB to 0 dB • Fine-tuning of
the level display via adjust screw • Mode-selector for Bar-mode (all LEDs up to maximum level illuminated)
or Dot-mode (only 2 LEDs illuminated) • 80 LEDs

2. SAFETY INSTRUCTIONS

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to
ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will
not accept liability for any resulting defects or problems.
OPERATING INSTRUCTIONS
Keep this device away from rain and moisture!
Never open the housing!
before you initial start-up.
CAUTION!
10/10 10453010_V_1_1.DOC