Lightmaxx PEGASUS PRO 600 RGB Bedienungsanleitung Seite 9

Universal DMX Operation (DMX mode)
This mode allows you to use universal DMX-512 console to operate.
1. Install the units in a suitable position.
2. Use standard XLR cable to connect your units together via the XLR connector on the rear of the units. For longer
cable we suggest a terminator at the last fixture.
3. Assign a DMX address to each the unit using dipswitches.
4. Turn on all units. Use DMX console to control your units.
DMX Signal
Cartoon (Running speed)
Master (set master unit)
LASER (size and color
setting)
Default (Restore
default setting)
ON
ON 5S (ON for 5 seconds)
ON 10S (ON for 10 seconds)
Press UP and down to choose
running speed from 1~99,
is the fastest
OFF
ON
Size
Color
Yes
No
9
99
(press up or down to
choose the size of
graphics)
5. Single Color
6. RGY
7. RGB
8. RGP