Philips beauty Satin ICE HP6475 Bedienungsanleitung Seite 12

ENGLISH
12
Cleaning the shaving head
1 Make sure the appliance is switched off and unplugged.
2 Remove the shaving foil.
3 Clean the hair chamber and the cutter block with the brush
(fig. 13).
Do not exert pressure on the shaving foil to avoid damaging it.
Rub a drop of sewing machine oil onto the trimmers and shaving
foil of the shaving head twice a year.
Cleaning the exfoliating head
1 Switch the appliance off.
2 Remove the exfoliating head by moving it in the direction of the
arrow indicated on the exfoliating head.
3 Clean the exfoliating head with the brush regularly (fig. 14).
You can clean the exfoliating head more thoroughly by rinsing it under
the tap.
Never rinse the adapter or the epilator itself with water.
Storage
1 Put the protective caps back onto the shaving head and
exfoliating head after use.
2 Store the appliance and the accessories in the pouch.
3 Put the skin cooler in the freezer cassette.
Replacement
When you use the shaving head several times a week, replace the
shaving foil (type HP6116) and the cutter block (type HP2911)
after one or two years of use or if these parts are damaged.