Philips beauty Satin ICE HP6475 Bedienungsanleitung Seite 11

- We advise you to exfoliate before going to bed at night, as this will
allow any skin irritation that may develop to diminish overnight.
- Apply a mild cream or body milk after exfoliating.
Cleaning and maintenance
Never rinse the adapter plug or the appliance itself with water.
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
1 Make sure the appliance is switched off and unplugged.
2 Remove the skin cooler from the appliance and slide the
protective sleeve off the skin cooler.
3 Clean the skin cooler, the appliance and the protective sleeve
with a moist cloth.
4 Clean the pivoting cooling head of the leg skin cooler with a
brush or moist cloth after each use (fig. 10).
Make sure the outside of the skin cooler is completely dry before
freezing it again.
5 Remove the epilating head (fig. 7).
Grab the epilating head by the ribbed sections and move it in the
direction of the arrow indicated on the epilating head.
6 Clean all accessible parts and the epilating discs with the brush
(fig. 11).
Never try to detach the epilating discs from the appliance.
7 Place the epilating head on the appliance and move it against the
direction of the arrow indicated on the epilating head until it
snaps home (fig. 12).
The epilating head can only be fitted onto the appliance in one way.
ENGLISH
11