Special Features - Austroflamm Jini Benutzerhandbuch

Jini/Jini Xtra 8 english
4. SPECIAL FEATURES JINI/JINI XTRA
Xtra heat storing technology
The model Jini Xtra has been equipped with the unique Xtra heat storing technology. This technology is
based on the patented Heat Memory System, but also on the special flue gas guidance and the
convection air which can be regulated or shut off completely. Consequently a fast heating system is being
combined with an extraordinarily efficient heat storing.
The convection air can be regulated according to demand with the attached lever (see picture). The more
the convection air outlets of the top plate are open, the faster heat but less heat storing can be reached. A
closed top plate will however lead to slow heat and longer heat storing.
Our hint: while the fire still burns let the convection air outlets open; close them after the fire has burnt
down in order to reach a steady heat emission.
Operation with external air supply
Jini/Jini Xtra can be operated with an external air connection. If the combustion air is being supplied directly to
the furnace by an air-tight pipe including closing mechanism from the outside, then the stove may be used in
residential property with mechanical ventilation.
Attention – all gaskets must be inspected periodically for tightness and have to be replaced if necessary.
If the stove in being used like that, a multiple stove installation on the same chimney is forbidden