Positioning And Levelling - Zanussi ZWG 7160 AP Benutzerhandbuch

• Remove the power supply cable and the draining and
inlet hose from the hose holders (C) on the rear of
the appliance.
• Unscrew the three bolts (A) and remove the hose
holders (C).
• Slide out the relevant plastic spacers (B).
Warning! Do not re-
move the drain hose
from the rear support. Re-
move this hose only if it is
necessary to drain the wa-
ter. Refer to "Frost precau-
tion" and "What to do if".
• Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.

Positioning and levelling

x 4
7