Philips HQ4608 Bedienungsanleitung Seite 5

1
C
2
C
3
1
2
C
4
Do not mix up the cutters and the guards.
This is essential since each cutter has been
ground with its corresponding guard for optimal
performance. If you accidentally mix the sets up, it
could take several weeks before optimal shaving
performance is restored.
C
5
Brush carefully in the direction of the arrow.
C
6
If necessary, you can clean the shaving unit with a
degreasing liquid (e.g. alcohol). Remember to
lubricate the central point of the guards with a
drop of sewing machine oil after cleaning.
Switch the shaver off, remove the
powerplug from the wall socket and pull
the appliance plug out of the shaver.
Remove the shaving unit.
Turn the wheel anticlockwise and remove
the retaining frame.
Remove and clean the shaving heads
(cutters and guards) one by one.
Clean the cutter with the short-bristled
side of the brush.
Brush the guard.
ENGLISH
7