Before Initial Use; Installation - Topcom Body Analysis Scale 1000 Bedienungsanleitung

1

Before initial use

1.1 Intended Purpose
This easy to use, large LCD display scale is battery-operated and makes daily weighing very easy.
It determines your personal body water, fat and muscle percentage.
1.2 Safety advice
• Always read the safety instructions carefully.
• Follow the basic safety precautions for all electronic equipment when using this Scale.
• Keep this User's Manual for future reference.
• This unit is not waterproof. Don't expose this product to rain or moisture.
• Put this equipment on a reliable flat surface before use.
• Don't step on the edge of the scale.
• Don't step on the scale when the surface is wet
• If any of the following situation arises, get the equipment checked by a service technician:
– The equipment has been exposed to moisture.
– The equipment has been dropped and damaged.
– The equipment shows signs of breakage.
– Do not place the equipment at a distance of less than 1.5 m away from a water source.
• Don't disassemble this scale. The scale doesn't contain any parts that can be repaired by the user.
• Use the scale only for its intended purpose.
1.3 Technical specifications
Operation temperature: 10°C ~ 40°C
Environmental humidity: <80% R.H.
Max. capacity: 180 kg (kilogram) / 397 lb (pound) / 28 st 5 lb (stone)
Graduation: 0.1 kg / 0.2 lb / 0.2 lb
Power supply: 2 x CR2032-Lithiumbatterien
Unit change: kg (kilogram), lb (pound) or st (stone)
2

Installation

Put the battery in the battery compartment to activate the display:
• Open the battery compartment at the bottom of the unit.
• When the batteries are pre-installed. Pull out the insulator.
• If they are not pre-installed, insert 2 x CR2032 - 3V - Lithium battery
with the positive pole (+) facing upwards.
• Close the battery compartment.
Do not short-circuit & dispose of in fire.
Remove the batteries if this device is not going to be used for a long period.
Keep batteries away from small children.
TOPCOM Body Analysis Scale 1000
3