Eventuelle Bodenunebenheiten müssen ausgeglichen werden. Hinterlassen Sie das Fitnessgerät so, dass sich niemand an herausstehenden Teilen verletzen kann. Hantelscheiben und Stangen sind nach dem Training vom Gerät zu nehmen und in die dafür vorgesehenen Ablagesysteme zu verstauen. BBP-MONSTER Full Functional Gym...
Place the exercise machine such that no one can hurt his or herself on protruding parts. Weight plates and bars should be removed from the machine after training, and stowed away in the storage system provided. BBP-MONSTER Full Functional Gym...
After assembly, check to make sure all of the machine’s functions are correct. If problems occur in this respect, check the machine for any errors in assembly with attention to the individual installation steps. Should you be unable to resolve the error, then please consult your dealer. BBP-MONSTER Full Functional Gym...
LONG REINFORCEMENT PLATE CIRCLE HOOK COPPER BUSHING WEIGHT PLATE TOP PLATE CABLE CLIP SLIDER PIN WEIGHT SELECT PIN RUBBER BUMPER BEARING CIRCLE FOR HOLE PULLEY LARGE PULLEY FOAM ROLLER LONG FOAM ROLLER SHEATHING ROUND PLUG GUIDE SLEEVE BBP-MONSTER Full Functional Gym...
Seite 9
SOCKET CAP SCREW M12*30 SOCKET CAP SCREW M12*35 BIG WASHER 12MM LEFT SAFETY RIGHT SAFETY LEFT HOLD SUPPORT RIGHT HOLD SUPPORT LEFT BARBELL SUPPORT RIGHT BARBELL SUPPORT BAR SUPPORT HOLDER PLATE BAR NYLON PLATE-1 NYLON PLATE-2 BBP-MONSTER Full Functional Gym...
Seite 10
BAR SUPPORT ROTATION SUPPORT AXIS COPPER BUSHING SMALL COPPER BUSHING LOCK PIN PLUM SHAPED SCREW SOCKET CAP SCREW M12*105 NYLON WASHER LEFT SUPPORT RIGHT SUPPORT FOAM ROLLER ROUND PLUG RUBBER PAD SHEATHING SOCKET HEAD SCREW M5*16 BBP-MONSTER Full Functional Gym...
SCHRAUBEN SCREWS BBP-MONSTER Full Functional Gym...
Seite 14
SCHRAUBEN SCREWS BBP-MONSTER Full Functional Gym...
Seite 15
8.Attach the PLATE BAR (87) to the holes on the lower rear of the LEFT & RIGHT MAIN UPRIGHTS using a HEX SCREW M12X25 (97) and a WASHER 12MM (46) on each 9. Attach CIRCLE HOOK (98) to the LEFT MAIN UPRIGHT (1). BBP-MONSTER Full Functional Gym...
Seite 16
STEP - 1 17 27 19 BBP-MONSTER Full Functional Gym...
Seite 17
8.Attach the PLATE BAR (87) to the holes on the lower rear of the LEFT & RIGHT MAIN UPRIGHTS using a HEX SCREW M12X25 (97) and a WASHER 12MM (46) on each 9. Attach CIRCLE HOOK (98) to the right MAIN UPRIGHT (2). BBP-MONSTER Full Functional Gym...
Seite 18
STEP - 2 BBP-MONSTER Full Functional Gym...
Seite 19
Attach the CLOSED HOOK (21) to the underside of the TOP CROSS FRAME (11) using two WASHER 10MM (45) and two LOCK NUT M10 (47) Attach the LEFT & RIGHT CHIN UP BARS (13&14) to the TOP CROSS FRAME (11) using four SCREWS M12X25 (55) and four WASHER 12MM (46) BBP-MONSTER Full Functional Gym...
Seite 20
STEP – 3 46 49 BBP-MONSTER Full Functional Gym...
Seite 21
SCREWS M10X50 (51), sixteen WASHER 10MM (45) and eight LOCK NUT M10 (47) Note: 1. Make sure the two CABLE STOPPERS (23) are attached at pulleys A. 2. At point C don’t assemble pulley now Repeat the above steps to assemble the right side of the machine! BBP-MONSTER Full Functional Gym...
Seite 22
STEP - 4 23 47 BBP-MONSTER Full Functional Gym...
Seite 23
11. Attach the ROTATIONAL HOLDERS (70+71) into the SLIDE PLATE BAR (66) using four SCREW M12X35 (77), eight WASHER 12MM (46) and four LOCK NUT M12 (49) 12. Attach a HOOK SUPPORT (72) to the RIGHT ROTATIONAL HOLDER (71) using a SCREW M10X30 (74) and a WASHER 10MM (45) BBP-MONSTER Full Functional Gym...
Seite 24
STEP - 5 BBP-MONSTER Full Functional Gym...
Seite 25
(60), two BEARINGS (35), two CIRCLE FOR HOLES (36) and two CIRCLE HOOKS (26) (See the exploded diagram for more detail, skip this step if pre-assembled) Attach the PULL BAR (12) to the end of both CABLE (30) with a CLIP (31) BBP-MONSTER Full Functional Gym...
Seite 26
STEP - 6 BBP-MONSTER Full Functional Gym...
Seite 27
SUPPORTS (81&82) and the LEFT & RIGHT SUPPORTS (109&110) to the MIDDLE CROSS FRAME (10) for storage You can insert HOLDER (86) into holes in the MIDDLE CROSS FRAME (10) and the CIRCLE HOOK (98) for storage BBP-MONSTER Full Functional Gym...
Seite 28
STEP - 7 BBP-MONSTER Full Functional Gym...
The steel cables should be carefully checked daily. In particular, the connection areas at the ends of the cables should be checked for tightness and evidence of fracturing. If the steel cable is damaged, training must be stopped and the cables immediately replaced. Failure to do so can lead to injury! BBP-MONSTER Full Functional Gym...
Pay attention to your breathing. Never hold your breath while exercising. Basically, exhale when lifting the weight and inhale when lowering it. Make sure you are sufficiently familiar with all of the machine’s functions. BBP-MONSTER Full Functional Gym...
Seite 31
ÜBUBGSANLEITUNG EXERCISE INSTRUCTIONS BBP-MONSTER Full Functional Gym...
Only use original spare parts to assure your warranty claims, and to avoid the risk of an injury. Making your own modifications to the machine, and non-compliance with capacity limits, render all warranty claims null and void. Importeur: IFS GmbH Lothforster Strasse 46 41849 Wassenberg BBP-MONSTER Full Functional Gym...