Seite 4
Eventuelle Bodenunebenheiten müssen ausgeglichen werden. Hinterlassen Sie das Fitnessgerät so, dass sich niemand an herausstehenden Teilen verletzen kann. Hantelscheiben und Stangen sind nach dem Training vom Gerät zu nehmen und in die dafür vorgesehenen Ablagesysteme zu verstauen. BB-9094 Barbarian Line Leg Master...
Seite 5
Place the exercise machine such that no one can hurt his or herself on protruding parts. Weight plates and bars should be removed from the machine after training, and stowed away in the storage system provided. BB-9094 Barbarian Line Leg Master...
Seite 6
After assembly, check to make sure all of the machine’s functions are correct. If problems occur in this respect, check the machine for any errors in assembly with attention to the individual installation steps. Should you be unable to resolve the error, then please consult your dealer. BB-9094 Barbarian Line Leg Master...
Seite 7
Schraubenschlüssel / Screw-Wrench Grösse/Size: 17mm / 19mm Sechskantschlüssel / Allen-Wrench Grösse / Size: 8mm / 10mm Zum Aufbau dieses Gerätes sind mindestens 2 Personen erforderlich! To build up this device at least 2 persons are required! BB-9094 Barbarian Line Leg Master...
Seite 8
Eigengewicht Gerät/ Dead Weight: ca. 108 KG Max. Belastbarkeit gesamt / Max. total Load capacity: Max. 200 KG Belastbarkeit Bein Curler / Loading capacity Leg Curl: Max. 100 KG Belastbarkeit Kniebeuge Bügel / Loading capacity Squat Rack: Max. 200 KG BB-9094 Barbarian Line Leg Master...
Seite 10
SKS-M12x75 Hex Bolt M12x75mm SKS-M12x85 Hex Bolt M12x85mm DIN-MUTTER-M10 Hex-Nut M10 DIN-MUTTER-M12 Hex-Nut M12 S-MUTTER-M12 Auto-Lock-Nut M12 U-Scheibe-3xd-10 Washer M10 Large Diameter 3xD U-Scheibe-3xd-12 Washer M12 Large Diameter 3xD U-Scheibe-B10 Washer M10 U-Scheibe-B12 Washer M12 BB-9094 Barbarian Line Leg Master...
Seite 11
EXPLOSIONSZEICHNUNG EXPLODED VIEW BB-9094 Barbarian Line Leg Master...
Seite 12
STEP - 1 BB-9094 Barbarian Line Leg Master...
Seite 13
STEP - 2 Alle Teile exakt ausrichten und sämtliche Schrauben festziehen. Align all parts accurately and then tighten all screws. BB-9094 Barbarian Line Leg Master...
Seite 14
STEP - 3 Alle Teile exakt ausrichten und sämtliche Schrauben festziehen. Align all parts accurately and then tighten all screws. BB-9094 Barbarian Line Leg Master...
Seite 15
STEP - 4 BB-9094 Barbarian Line Leg Master...
Seite 16
STEP – 5 Alle Teile exakt ausrichten und sämtliche Schrauben festziehen. Schrauben für die Polster (18) nur Handfest anziehen. Align all parts accurately and then tighten all screws. Only hand-tighten the bolts for the Foam Pads (18). BB-9094 Barbarian Line Leg Master...
Seite 17
STEP - 6 Alle Teile exakt ausrichten und sämtliche Schrauben festziehen. Align all parts accurately and then tighten all screws. BB-9094 Barbarian Line Leg Master...
Seite 18
STEP – 7 Alle Teile wie dargestellt zusammenfügen. Schrauben festziehen. All parts fit together as shown. Tighten the bolts. BB-9094 Barbarian Line Leg Master...
Seite 19
(the procedure for this is described in the mounting instruction). If the steel cable is damaged, training must be stopped and the cables immediately replaced. Failure to do so can lead to injury! BB-9094 Barbarian Line Leg Master...
Seite 20
Pay attention to your breathing. Never hold your breath while exercising. Basically, exhale when lifting the weight and inhale when lowering it. Make sure you are sufficiently familiar with all of the machine’s functions. BB-9094 Barbarian Line Leg Master...
Seite 21
Only use original spare parts to assure your warranty claims, and to avoid the risk of an injury. Making your own modifications to the machine, and non-compliance with capacity limits, render all warranty claims null and void. Importeur: IFS GmbH Lothforster Strasse 46 41849 Wassenberg BB-9094 Barbarian Line Leg Master...