Mremote Control K In L Out - Hitachi CP-X5021N Bedienungsanleitung

G
HDMI
• Type :Digital audio/video connector
• Audio signal : Linear PCM (Sampling rate; 32/44.1/48 kHz)
Pin Signal
T.M.D.S. Data2 +
1
2 T.M.D.S. Data2 Shield
T.M.D.S. Data2 -
3
4 T.M.D.S. Data1 +
T.M.D.S. Data1 Shield
5
6 T.M.D.S. Data1 -
T.M.D.S. Data0 +
7
H AUDIO IN1, I
Ø3.5 stereo mini jack
• 200 mVrms, 47kΩ terminator
AUDIO IN3 (R, L)
J
RCA jack x2
• 200 mVrms, 47kΩ terminator
L MIC
Ø3.5 mono mini jack
<Low level>
• 2 mVrms, 1kΩ terminator
<High level>
• 20 mVrms, 1kΩ terminator
REMOTE CONTROL K IN L OUT
M
Ø3.5 stereo mini jack
• To be connected with the remote control that came with the projector.
G
L
H
I
J
Pin
T.M.D.S. Data0 Shield
8
9 T.M.D.S. Data0 -
10 T.M.D.S. Clock +
11 T.M.D.S. Clock Shield
12 T.M.D.S. Clock -
13 CEC
14 Reserved(N.C. on device)
AUDIO IN2
Connection to the ports (continued)
K
Signal
AUDIO OUT (R, L)
K
RCA jack x2
• 200 mVrms, 1kΩ output impedance
5
M
2 4 6 10 12 14
8
5 9
1 3 7 11 13 15
Pin Signal
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5V Power
19 Hot Plug Detect
16 18
17 19