ELRO C803IP.2 Bedienungsanleitung Seite 19

• After "Name" enter the name you want to assign to the camera.
• Then press the "OK" button.
Your camera has been added to your phone and will appear on the start screen of
your App. On this you can see if the camera is connected (ONLINE)
N
connected (OFFLINE).
4.2.2. iOS
• Download the App "Elro Install" from the App Store and install it.
• Start the App. The start screen of the app appears.
• Press "Add camera".
• Press the "QR code" button.
• You can also choose to manually enter the code of your camera. To do this, press the
"Add" button. Next, enter the code of your camera behind "UID".
S1
code under the QR code on your IP camera.
• Next, enter the code behind "Password": 000000.
• After "Name" enter the name you want to assign to the camera.
• Then press the "Save" button.
Your camera has now been added to your App and will appear on the home screen of
your App. Here you can see if the camera is connected (Online)
V
(Offline).
4.2.3. General
• For instructions on placing your camera go to section 4.6.
• For instructions on using your camera with the App go to chapter 5.
4.3. Install your camera on your PC
• Insert the included CD-ROM into your computer.
• Launch "IPCamSetup.exe" from the CD-ROM.
• Go through the installation by double clicking on "Next".
• Complete the installation by clicking on "Restart computer".
The IP camera tool is now installed on your computer. You will find the shortcut on your
desktop.
!
Please note! Do not remove this shortcut! You will have to re-install the IP camera tool
if you do.
4.4. Linking to your camera
!
Please note! To be able to use the IP camera's full functionality, you have to use
Internet Explorer 6 or higher (32 bit) and select ActiveX Mode. It is not possible to make
video recordings in other web browsers.
!
Please note! If you opt for the ActiveX mode there is a possibility that you will not have
any picture yet. If this is the case, perform the following steps:
• In Internet Explorer, go to: Tools-> Internet options-> Security settings ->Custom
level
D
• Change the deactivated options to "Questions" under the ActiveX control elements
and insertion applications. If the "Questions" option is not available, tick "Activate".
See also:
E F
M4
The "Add camera" menu appears.
S3
Next, scan the QR code at the bottom of your camera.
S2
U1
G
or if it is not
N1
S
You can find this
U2
U3
or not connected
V1
19