Herunterladen Diese Seite drucken

Viessmann 4700 Anleitung Seite 8

Digital main semaphore hp0 / hp1
Vorschau ausblenden Andere Handbücher für 4700:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Alle Anschluss- und Montagearbeiten dürfen nur bei abgeschalteter Betriebsspannung durchge-
führt werden! Die Stromquellen müssen so abgesichert sein, dass es im Falle eines Kurzschlusses
nicht zum Kabelbrand kommen kann. Verwenden Sie nur nach VDE / EN gefertigte Modell-
bahntransformatoren und Kabel mit ausreichendem Querschnitt!
Installation and electrical connection must only be carried out if the digital system and any other
powered device on the layout is disconnected! Any power supply must be protected in such a man-
ner that the wiring cannot burn even in the event of a short circuit. Only use transformers suitable
for model trains which comply with VDE / EN standards or the appropriate standar in your country.
Please bear in mind that ELV wiring generally requires bigger cable sizes and make sure that you
use suitable cables!
Le réseau entier doit être mis hors tension, avant d'effectuer des travaux d'assemblage et de
raccordement quelconque.
Les sources de courant doivent être protégées afin d'éviter un incendie en cas de court-circuit.
N'utilisez qu'un transformateur conçu pour les trains miniatures construit selon les normes profes-
sionnelles « VDE/EN » et des câbles à section suffisante.
Fig. 1
ca. 2 Lok-Längen
approx. two loco-
motive lengths
Approx. double
longueur d'une
locomotive
8
System Märklin
Märklin system
Le système Märklin
Digital-Zentrale
digital command
station
Centrale numérique

Werbung

loading

Diese Anleitung auch für:

4700h0