Herunterladen Inhalt Inhalt Diese Seite drucken

Power Supply - Bosch Rotak 33 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für Rotak 33:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
OBJ_BUCH-1919-006.book Page 12 Wednesday, January 20, 2016 2:34 PM
12 | English
 Switch on the motor according to
the instructions with feet well away
from rotating parts.
 Do not put hands or feet near or un-
der rotating parts.
 Always stand clear of the discharge
zone when operating the machine.
 Never pick up or carry the machine
while the motor is running.
 Do not modify this product. Unau-
thorized modifications may impair
the safety of your product and may
result in increased noise and vibra-
tion.
 Regularly inspect the supply cable
and any extension cables. Do not
connect damaged cables to the sup-
ply or touch a damaged cable before
it is disconnected from the supply. A
damaged cable can lead to contact
with live parts. Beware electric
shock hazard.
Leaf Collect
The leaf collect blade has been de-
signed to allow you to pick up autumn
leaves from your lawn. In order for this
functionality to work within optimal pa-
rameters, please note the following:
– only collect leaves with the machine
set at 70 mm cutting hight
– collect leaves from your lawn only
– before collecting leaves inspect the
area where the machine is to be used
and keep people, pets, glass struc-
tures and cars away from use
Remove the plug from the socket:
– Whenever you leave the machine.
– Before clearing a blockage,
F 016 L81 397 | (20.1.16)
– Before checking, cleaning or working
on the machine,
– After striking a foreign object. Inspect
the machine for damage and make re-
pairs as necessary,
– If the machine starts to vibrate abnor-
mally (check immediately).

Power supply

 The voltage indicated on the rating
plate must correspond to the volt-
age of the power source.
 We recommend that this equipment
is only connected into a socket
which is protected by a circuit-
breaker that would be actuated by a
30 mA residual current.
 Only use or replace power supply
cables for this unit which corre-
spond to the types indicated by the
manufacturer. See the operating in-
structions for the order no. and
types.
 Never touch the mains plug with wet
hands.
 Do not run over, crush or pull the
power supply cable or extension
lead, otherwise it may be damaged.
Protect the cable from heat, oil and
sharp edges.
 The extension lead must have a
cross section in accordance with the
operating instructions and be pro-
tected against splashed water. The
connection must not be in water.
Always wear gardening gloves when
handling or working near the sharp
blades.
Bosch Power Tools

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis