Appliance Description; Operation - Beurer MG 55 Gebrauchsanweisung

• Never use the device under covers, such as blankets or pillows.
handling
cAutION
Switch the device off and disconnect the power supply after every use and before every cleaning.
• Make sure that all moving parts can move freely at all times.
• Make sure that no hair can get caught in the device.
• Avoid contact with sharp or pointed objects.
• Do not kink the cable.
• Make sure that the device is not too close to heat sources such as ovens, radiators or direct sun-
light.
Disposal
cAutION
Follow local regulations regarding the disposal of materials. The appliance should be disposed
of according to Regulation 2002/96/EC-WEEE (Waste Electrical and Electronic Equipment). In
case of queries, contact the municipal authorities responsible for waste disposal in your area.

4. Appliance description

2
1
5. start-up
• Remove the packaging.
• Check the device, power supply and cables for damage.
• Connect the device to the mains power supply. The device must be switched off.
• Route the cable safely so that there is no risk of anyone tripping over it.

6. Operation

Make sure that the device is switched off before inserting the power cable. Switch on the device by rotating
the controller clockwise past the detent.
Set the desired massage speed using the control. The
button. Replace the massage attachments by rotating the attachment on the product in an anti-clockwise
direction and replacing. Fix the newly positioned massage attachment in place by rotating it in a clockwise
direction. Guide the device with both hands to the area of the body to be massaged. You can stand, sit or lie
down and can massage yourself or another person. The massage intensity can be altered by pressing more
4
3
5
1 Massage head
2 Heat function
3 On-Off switch; control
(infinitely adjustable massage intensity)
4 Heat function
Infrared heating
5 Interchangeable massage attachments
Heat function
can be switched on using the "Heat"
9