When Connecting To Separately Sold Power Amp - Pioneer AVH-P4100DVD Installationsanleitung

Connecting the units

When connecting to separately sold power amp

Rear output
This product
Front output
Subwoofer output
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 6*
and 7* when Pin 5 is an antenna control type.
In other types of vehicles, never connect 6* and
7*.
When you connect the separately sold
multi-channel processor (e.g., DEQ-P6600) to
this unit, do not connect anything to the
speaker leads and system remote control
(blue/white).
When you connect the multi-channel processor
to this unit, refer to multi-channel processor's
installation manual for the connection method.
Perform these connections when
using the optional amplifier.
8
To rear output
To front output
To subwoofer
output
Blue/white (7*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Left
Subwoofer
Front speaker
Rear speaker
Power amp
(sold separately)
Connect with RCA cables
(sold separately)
System remote control
Right
 
Subwoofer
 
 
Front speaker
 
 
Rear speaker
 
Power amp
(sold separately)
Power amp
(sold separately)