Description Of The Device - Archos Arnova 7 G2 Handbuch

DESCRIPTION OF THE DEVICE

1 Power/Lock: slide left and hold to switch on/off. Slide right to lock the device's
touchscreen.
When you slide left and hold, a window appears with a list of options (when the product is on). Tap
on "Power Off" to fully shut down your ARNOVA. Tap on "Suspend" to put the device in standby
(and allow a quick start up when you next tap the screen). While the device is in suspend mode, slide
right to lock the device with its screen off. This can be useful if your ARNOVA is in your backpack, for
example, and you do not want to wake it up by touching the screen by accident.
2
Micro-SD card reader
Charging indicator: Red light: battery charging / Yellow: battery charged.
3
Loudspeakers
4
Headphone jack
5
6 Power connector: to connect the supplied power cable.
Micro-USB port: to connect your ARNOVA to your computer, using the included USB cable (to transfer files). You can also con-
7
nect a keyboard, a mouse or a mass storage USB device. Go on the Home screen, tap on the Menu icon
. If the Host port is off, tap on the Host port line to turn it on. Important: turn off the Host port after use.
USB Mode select
8
Leg stand: pull it out, and it will allow your ARNOVA to stand by itself on a flat, stable surface.
IMPORTANT:
Your device is frozen.You can turn it off. Slide and hold to the left the ON/OFF button for 10 seconds or press the reset
button.
2
UserGuide_Arnova_7G2_109860_book.indd 2
1 2 3
4
8
, then select
5
6
4
7
Settings/
???
01/06/2011 16:47:40