Yamaha HTR-5840 Bedienungsanleitung Seite 58

ADVANCED SETUP MENU
■ ADVANCED SETUP menu items
Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening
environment.
Speaker impedance SP IMP.
Use to switch the speaker impedance for this unit.
Choices: 8 ! MIN"#4 !#MIN
• Select 8 !#MIN#to set the speaker impedance to 8 !#.
• Select 4 !#MIN to set the speaker impedance to 4 !#.
SP IMP. Speaker
Front
4 !#$%&
Center
Surround
Surround back
Front
8 !#$%&
Center
Surround
Surround back
Factory presets PRESET
Use to reset all parameters to the factory presets (see
page 68).
Choices: CANCEL, RESET
• Select CANCEL if you do not want this unit's
parameters to be initialized when you reset the factory
presets.
• Select RESET if you want all of this unit's parameters
to be initialized when you reset the factory presets.
Note
This setting does not affect ADVANCED SETUP menu item
parameters.
56
Impedance level
If you use one set (A or B),
the impedance of each
speaker must be 4 ! or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 8 ! or
higher.
The impedance of each
speaker must be 6 ! or
higher.
If you use one set (A or B),
the impedance of each
speaker must be 8 ! or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 16 ! or
higher.
The impedance of each
speaker must be 8 ! or
higher.