Fitting The End Cap - Pioneer prs x 340 Bedienungsanleitung

3. Drill 2.5 mm diameter holes at the
point marked, and install the ampli-
fier, either on the carpet or directly
to the chassis.
Tapping-screws
(4 × 18 mm)
Drill a 2.5 mm diameter hole

Fitting the end cap

1. Align the main unit and end cap
Floor mat
or chassis
2. Tighten the screw with a 4 mm
holes, and insert the screw.
Screw
hexagonal wrench (not supplied).
Hexagonal wrench
Endcap
12