Werbung
Installation of the electrics
The electrics may only be installed by a qualified electrician in accordance with the VDE and EVU guidelines.
Information on assembly of the sauna furnace and the control device can be found in the enclosed assembly
instructions.
Assembly recommendations
Please pre-drill all screw connections in order
to avoid any damage to the wooden sections.
The following symbol in the instructions will
indicate when this is necessary:
To prevent the dropping of the glass door, tighten the allen screw of the braces firmly.
Front wall with cable routing
R1:
for running cable from
oven control system module
to the sauna oven
R2:
for running cable from
oven control system module
to the control unit
R3 + R4:
reserve
Assembly conditions for a weka assembly team
If you wish for help assembling your cabin and choose to employ a weka assembly team, weka Holzbau
GmbH will carry out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating
them with a wood protection agent, the delivery and assembly of accessories and accessory parts. Electrical
connections are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article
or the individual parts over a distance greater than 5 m or to another level is not included in the assembly
price quoted. The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made to DIN 18202 'Level tolerances in building construction',
tab. 3, row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations before
assembly begins. The substrates/floors/foundations constructed or selected by you must be suitable for the
assembly.
Technische Änderungen vorbehalten!
5
Alle Maße ca. Maße!
Copyright HRB 3662
Werbung
