Kity MS 305 DB Originalanleitung Seite 11

Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working experience
with your new KITY machine.
Advice:
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
improper handling,
non-compliance with the instructions for use,
repairs by third party, non authorized skilled workers,
installation and replacement of non-original spare parts,
improper use,
failures of the electrical system due to the non-com-
pliance with the electrical specifications and the
VDE 0100, DIN 57113 / VDE 0113 regulations
Recommendations:
Read the entire text of the operating instructions prior to
the assembly and operation of the device.
These operating instructions are intended to make it easier
for you to get familiar with your device and utilize its in-
tended possibilities of use.
The operating instructions contain important notes on how
to work safely, properly and economically with your ma-
chine and how to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and working life of
the machine.
In addition to the safety regulations contained herein, you
must in any case comply with the applicable regulations of
your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to
protect them from dirt and humidity, and store them near
the machine. The instructions must be read and carefully
observed by each operator prior to starting the work. Only
persons who have been trained in the use of the machine
and have been informed on the related dangers and risks
are allowed to use the machine. The required minimum
age must be met.
In addition to the safety notes contained in the present
operating instructions and the special regulations of your
country, the generally recognized technical rules for the
operation of wood working machines must be observed.
m
In these operating instructions we have marked
the places that have to do with your safety with
this sign.
Read the manual before
working with this machine
N
Use hearing or ear
protection.
I
Use eye protection.
Know your Pullover Mitre Saw (Fig. 1)
1
Pullover carriage
2 Upper blade guard
3
Lower blade guard lock lever
4
Trigger switch
5 Handle
6
Motor
7
Lower blade guard
8 Tungsten Carbide Tipped blade
9
Fence
10 Extension support
11 Mitre scale
12 Arrester
13 Table insert
14 Turn table
15 Bolt holes
16 Base
17 Clamp
18 Dust bag
19 Handle
20 Laser
21 Span scale
22 Lock button
23 Laser power button
24 Lock lever
Scope of delivery
Technical data
ø blade
ø bore
Dimensions
Weight
ø turn table
Mitre stops left and
right
Pivoting range
Inclination range
Max. Capacity
Cross cut at 90°
Mitre cut at 45°
Becel cut at 45°
Compound cut at 45°
Drive
Motor V/Hz
Consumption power
P1
No load speed
Subject to technical changes!
Information on noise
The noise levels of the machine during operation are as
follows:
L : 96.4dB(A) K=3dB(A)
pA
L : 109.4dB(A) K=3dB(A)
wA
Vibration: 2.58m/s 2 K=1.5m/s
Warning: Noise can seriously damage your health. If the
MS 305 DB
Oscillating Mitre Saw
Saw blade D 305 Z 40
Blade key 13 mm
Extension brackets 2x
Clamping jaw
Dust bag
Allen key 6 mm
Operating instructions
305 mm
30,0 mm
780 x 460 x 485 mm
23,0 kg
250 mm
0°, 15°, 22,5°, 30°, 45°
-60°/0°/52,5°
-45°–45°
109 x 315 mm
109 x 220 mm
66 x 315mm
39 x 220mm
230V / 50 Hz
1800 W (S3 25%)
5000 1/min
2
11