Technical Data; Spdif Out - AEG CTV 2401 Bedienungsanleitung

Problem
Only one sound channel.
Good image, but no sound.
TV set turns off.
No response to buttons;
Teletext rolls.

16. TECHNICAL DATA

Electrical data
Power supply:
Power consumption max.:
Power consumption in standby mode:
Screen
Screen diagonal:
Aspect ratio:
Resolution:
Audio
Audio output:
Reception
Channel options:
Channels:
TV system:
Inputs
Euro-AV:
AV:
PC:
Component:
SPDIF out (digital audio);
HDMI:
Antenna:
Remote Control
Batteries:
LED class:
General
Dimensions (W x D x H):
Weight:
Operating temperature:
Manual ID:
Subject to changes without prior notice.
36
Possible cause/solution
Check balance settings in VIDEO menu.
Check if the sound is muted?
Press MUTE.
Check if the sound is set very low?
Press VOL +.
Check if the off timer is activated if no channel is received?
Turn the TV set off at the main switch and turn on again after a
moment.
Input: 100 - 240 V ~ 50/60 Hz
60W
< 1 W
24" /61 cm
16:9 (4:3 selectable) + Zoom 1+2
1920 x 1080
2 x 3 W
100
VHF band I channel2 - 4
VHF band III channel 5 - 12
UHF channel 21 - 69
PAL B/G, D/K, I / SECAM B/G, D/K, L, LL
SCART
1 x RCA / 1 x S-Video
1 x VGA D-SUB / 1 x PC audio stereo jack
Y Pb Pr

SPDIF out

HDMI
75 Ohm
2 x type LR03/AAA
1
577 x 170 x 427 mm (incl. foot)
approx. 5.7kg
10°C - 35°C
E41456/PE/2009