Topic:
Deinstallation instructions
EN
3
3 Removing of the faceplate
Please remove carefully the faceplate.
In doing so make sure that no holding
cog gets broken off. Please start with
4
4 Usage of the extraction keys
Please insert the extraction keys
into the dedicated recesses between
the installation frame and the unit's
housing.
XOMAX
one corner and lever the faceplate by
slight pressure clockwise outwards.
In each case the key should be inserted
centered, the inserting point should be
equally distanced both from the top and
from the bottom.
42
faceplate
extraction keys
X M - 2 D T S B N 6 2 1 4