Decalcification And Cleaning - TriStar KZ-1218 Gebrauchsanleitung

Insert filter paper in the filter holder or use the permanent filter and add the desired quantity of
ground coffee. Replace the filter holder.
To switch on, press the START button, the coffee maker will start working and the red pilot
light will light on.
Make sure the carafe is placed correctly on the hotplate.
When you remove the carafe from this appliance, a non-drip valve will automatically
operate to stop any drops of coffee dripping onto the hotplate. Replacement of the carafe
automatically opens the non-drip valve and allows any remaining coffee to filter through
into the carafe. Wait until the brewing process is finished and the filter is empty. To switch
off the coffee machine, press the START button again. The red pilot light will go off to
indicate that the coffeemaker has been switched off.
KEEPING THE COFFEE HOT
The carafe can remain on the hotplate, which begins to heat up as soon as the coffeemaker is
switched on.
The hotplate will keep die coffee hot until the coffeemaker is switched off (red pilot light
goes off).

DECALCIFICATION AND CLEANING

Decalcifying the coffee maker prolongs its life span. For decalcification only use products
especially made for decalcification of coffee makers. Never use a dishwasher to clean the
jug.
******
9