Further Information; Safety Instructions - Odys Slim 6L Pro Benutzerhandbuch

Error G
The camera does not
start after connection
to the PC. The
camera display lights
up and LCD shows all
symbols.
Note: This table contains possible causes of error. Some of these are normal
phenomena.

11 Further information

11.1 Safety instructions

Although this product is safe, please observe the following information
and warnings.
Caution
1. Do not modify or dismantle the camera.
2. Contact your dealer for repairs and inspections.
3. Do not shake the camera or subject it to hard knocks.
The camera may be damaged if it falls.
4. Ensure that no water or moisture enters the camera.
This can cause short circuits and accidents.
Note
When using the flash, do not look directly into it, as this can
damage the eyes.
ODYS Slim 6L Pro
PC or camera is busy and there is no
Cause:
connection between the two.
Disconnect the USB cable from the PC,
check why the PC is busy and insert the
Solution:
cable again.
41