Sony DSC-HX10 Gebrauchsanleitung Seite 21

Extracted Color
Watercolor Effect
Illustration Effect
EV
ISO
White Balance
Focus
Metering Mode
Cont. Shooting
Interval
Bracket Setting
Scene Recognition
Soft Skin Effect
Smile Shutter
Smile Detection
Sensitivity
Face Detection
Anti Blink
Movie SteadyShot
Position
Information*
GPS Log REC*
In-Camera Guide
* DSC-HX10V only
When [Partial Color] is selected in Picture Effect, selects
the color to extract.
When [Watercolor] is selected in Picture Effect, sets the
effect level.
When [Illustration] is selected in Picture Effect, sets the
effect level.
Adjust the exposure manually.
Adjust the luminous sensitivity.
Adjust color tones of an image.
Select the focus method.
Select the metering mode that sets which part of the
subject to measure to determine the exposure.
Select the number of images taken per second for Burst
shooting.
Set the type of the bracket shooting.
Set to automatically detect shooting conditions.
Set the Soft Skin Effect and the effect level.
Set to automatically release the shutter when a smile is
detected.
Set the Smile Shutter function sensitivity for detecting
smiles.
Select to detect faces and adjust various settings
automatically.
Set to automatically shoot two images and select image
in which the eyes are not blinking.
Set the strength of SteadyShot in movie mode. If you
change the setting for [Movie SteadyShot], the angle of
view will change.
Check the GPS triangulating status and update the
position information.
Record the route taken while carrying the camera.
Search the camera's functions according to your needs.
GB
GB
21