JVC KD-S6060 Bedienungsanleitung Seite 8

Searching for a station manually:
Manual search
1
Select the band (FM1 – 3, AM).
FM
FM1
AM
AM
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold
until "M" (manual) starts flashing on
the display.
3
Tune in to a station you want while
"M" (manual) is flashing.
To tune in to stations of higher
frequencies
To tune in to stations of lower
frequencies
• If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
• If you hold down the button, the frequency
keeps changing (in 50 kHz intervals for FM
and 9 kHz intervals for AM—MW/LW) until
you release the button.
8
FM2 FM3
¢ or 4
When an FM stereo broadcast is hard to
receive:
MODE 1
Press MODE to enter the
functions mode while listening
to an FM stereo broadcast.
2
8 MO Press MO (monaural), while
still in the functions mode, so
that the MO indicator lights up
on the display.
Each time you press the
button, the MO indicator lights
up and goes off alternately.
MO (monaural) indicator
MO
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.