Other External Component Operations - JVC KD-G341 Bedienungsanleitung

Indications Item
(
AUX ADJ A.ADJ 00
Auxiliary input level — A.ADJ 05
adjustment
TAG DISP • TAG ON
Tag display • TAG OFF
AMP GAIN • LOW PWR
Amplifier gain control
• HIGH PWR
IF BAND • AUTO
Intermediate
frequency band • WIDE

Other external component operations

You can connect an external component to the AUX
(auxiliary) input jack on the control panel.
Portable audio player, etc.
~
Ÿ
Turn on the connected component and
start playing the source.
Selectable settings, [reference page]
: Initial)
: Adjust the auxiliary input level to avoid the sudden increase of the
output level when changing the source from external component
connected to the AUX input jack on the control panel.
: Shows the Tag information while playing MP3/WMA tracks, [11].
: Cancels.
: VOL 00 – VOL 30 (Select this if the maximum power of the speaker is
less than 50 W to avoid them from damaging the speaker.)
: VOL 00 – VOL 50
: Increases the tuner selectivity to reduce interference noise between
close stations. (The stereo effect may be lost.)
: Subject to the interference noise from adjacent stations, but the
sound quality will not be degraded and the stereo effect will remain.
Stereo mini plug
(not supplied)
!
Adjust the volume.
⁄
Adjust the sound as you want.
(See page 12.)
To check the clock time while listening to an
external component
AUX IN
Ô
Clock
15