Automatic Shutoff; Safety System - WMF Lineo Gebrauchsanweisung

10
▪ The mains plug is to be pulled:
⋅
if malfunctions occur during use,
⋅
before cleaning and care,
⋅
after use.
▪ No liability is accepted for any damages resulting from misuse,
incorrect operation or improper repairs.
Claims under warranty are likewise excluded in such cases.
▪ Packaging material, such as plastic film bags, do not belong in the
hands of children.
Start-up
Thoroughly clean the inside of the pot prior to the first use. To do so,
open the lid by pressing the button on the handle.
A strainer insert in the pour spout ensures that larger limescale parti-
cles are kept back when pouring.
The unnecessary length of the connecting cable can be wound at the
bottom of the base part.
Connect the mains plug to an earthed socket.
Fill with at least 0.3 litres of water, but at the most up to the Max -
marking. Close the lid. Only in this way does the automatic boil stop
work reliably.
Place the pot on the base in any position. Now you can press down the
power switch below the handle. The control lamp in the power switch
shows that the device is heating.
The power switch only engages if the pot is on the base.
Do not use the water from the first boiling process for food prepara-
tion.

Automatic shutoff

The automatic boil stop switches off the device shortly after the water
is boiled. The shutoff time is extended if the pot is only filled with a
little water.
If only warm water is desired, the heating process can always be
stopped by pressing the power switch. The shutdown takes place
automatically if the pot is lifted from the base.
For functional reasons, some condensation may run out of the outlet
openings at the bottom of the handle to the edge of the base. This
happens for technical reasons and does not impair the safety of the
device.

Safety system

A thermostat protects the kettle from overheating due to accidental
operation without water by switching off the device.
It is essential to allow the pot to cool down before filling with water.
Should the first thermostat malfunction due to improper use, an
additional temperature limiter ensures reliable protection.