Xoro HRT 7520 Bedienungsanleitung Seite 53

To external decoder or amplifier
You have the possibility to transmit the digital audio signal to a decoder or amplifier. Therefore use
the Coaxial output.
1. Switch off and unplug all devices
2. Connect the receiver and the TV with a SCART or HDMI cable
3. Connect the HRT 7520 to the decoder or amplifier (RCA cable)
4. Switch on all devices
5. Activate the Digital Input at your decoder or amplifier
Note:
The Cables are not part of the accessories
You can gain information about the audio signal by pressing the AUDIO key on your
remote control
Connection
1 3