Technical Data - MAC Audio Z 2100 Bedienungsanleitung

Dear MAC AUDIO Customer,
The Z 2100 / Z 2200 car hi-fi power amplifier will enable you to satisfy your high
demands on sound reproduction in your car. With its impressive deep-bass power
reserves, low harmonic content and neutral reproduction, the Z 2100 / Z 2200 takes car
hi-fi to new heights. The amplifier is characterized by low operating current, rapid
switching capabilities and excellent temperature stability. Experience and enjoy how
this high-tech machine perfectly reproduces magnificent sound.
Please read all of the owner's manual before installing and using the amplifier.
1.

TECHNICAL DATA

Max. output power
(1 kHz sinus burst 2:8, B+=14.4V)
Nominal output power
(DIN 45 342, B+=14.4V)
Max. output power
(1 kHz sinus burst 2:8, B+=14.4V)
Nominal output power
(DIN 45 342, B+=14.4V)
Loudspeaker impedance (stereo)
Frequency response
Total harmonic content (DIN 45 403)
Stereo separation (IEC 581 )
Weighted noise distance (IEC A)
Input sensitivity LOW LEVEL INPUT
Input impedance LOW LEVEL INPUT
Low-pass filter
High-pass filter
Bass boost
Supply
Fuse
Sizes (W x H x D)
Weight
GB
Z 2100
Stereo / Bridged
2 x 150 W / 1 x 500 W
2 x 70 W / 1 x 200 W
2 x 200 W
2 x 100 W
2 – 8 Ohm
5 – 50 000 Hz (-3 dB)
< 0.05% (1 kHz)
> 60 dB (1 kHz)
> 100 dB
200 mV – 5 V
25 kOhm
50 – 250 Hz, 12 dB per octave
40 – 500 Hz, 12 dB per octave
0...12 dB at 45 Hz
+ 12V (9 – 15 V), minus to ground
2 x 15 A
265 x 54 x 293 mm
3.3 kg
11
on 4 Ohm
on 4 Ohm
on 2 Ohm
on 2 Ohm