Hitachi CP-SX635 Bedienungsanleitung Seite 131

Connection to the ports Connection to the ports
A RGB 1, RGB OUT
B
D-sub 15pin mini shrink jack
• Video signal: RGB separate, Analog, 0.7Vp-p,
75 terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
Pin
1
Video Red
2 Video Green
3 Video Blue
4
(No connection)
5 Ground
6 Ground Red
7
Ground Green
8 Ground Blue
C
RGB 2(G/Y, B/C
• BNC jack x 5
• Video : Analog 0.7Vp-p, 75 terminator
• H/V, sync, : TTL level (positive/negative)
• Composite sync, : TTL level
D
HDMI
• Type :Digital audio/video connector
• Audio signal : Linear PCM (Sampling rate; 32/44.1/48 kHz)
Pin Signal
1 T.M.D.S. Data2 +
2 T.M.D.S. Data2 Shield
3 T.M.D.S. Data2 -
4 T.M.D.S. Data1 +
5 T.M.D.S. Data1 Shield
6 T.M.D.S. Data1 -
7 T.M.D.S. Data0 +
D B A
RGB1
Y
HDMI
RGB
VIDEO
OUT
AUDIO IN1
AUDIO IN2
S-VIDEO R L
AUDIO IN3
At RGB signal
Signal
/P , R/C /P , H, V)
B B R R
Pin
8 T.M.D.S. Data0 Shield
9 T.M.D.S. Data0 -
10 T.M.D.S. Clock +
11 T.M.D.S. Clock Shield
12 T.M.D.S. Clock -
13 CEC
14 Reserved(N.C. on device)
C
LAN
C /P
B B
C /P
R R
RGB2
G/Y B/C /P R/C /P
B B R R
H V
R L AUDIO OUT REMOTE
CONTROL
AUDIO IN4
Pin
9 (No connection)
10 Ground
11 (No connection)
A : SDA (DDC data), B : (No connection)
12
13 H. sync / Composite sync.
14 V. sync.
A : SCL (DDC clock), B : (No connection)
15
Signal
Connection to the ports
USB CONTROL
11 12 13 14 15
6 7 8 9 10
1 2 3 4 5
Signal
18 16 14 12 10 8
19 17 15 13 11 9 7
Pin Signal
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5V Power
19 Hot Plug Detect
6 4 2
5 3 1
3