Usage Information; Control Panel; Freezer Partition Temperature Setting Button; Alarm Light - Nabo GS 1820 Bedienungsanleitung

EN

USAGE INFORMATION

30

Control panel

Freezer temperature
set button

Freezer partition temperature setting button

This button is used to set the temperature of the freezer and to activate SF mode.
To set values for freezer partition, press this button.

Alarm light

If there is a problem within the freezer, the alarm LED will light up red.

Super freezer mode

When would it be used?
• To freeze large quantities of food.
• To freeze fast food.
• To freeze food quickly.
• To store seasonal food for a long time.
How to use?
• Press the temperature set button until the super freezing light comes on.
• The super freezing LED will light when this mode is active.
• The maximum amount of fresh food (in kilograms) which can be frozen within
24 hours is shown on the appliance label.
• For optimal appliance performance in maximum freezer capacity, set the
appliance to active SF mode 3 hours before you put the fresh food into the
freezer.
While super freezer mode is active:
• If you press the temperature set button, the mode will be cancelled and the
setting will be restored from -16 °C.
Note: "Super Freezer" mode will be automatically cancelled after 30 hours or
when the freezer temperature drops below -32 °C.
Symbol of
Super Freezing Mode
indicator LED
Alarm Freezer adjusted
temperature indicator